Metrohm tiamo 2.4 (process analysis) - Manual (Page 1601)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1585
Selection Factory settings | "Method name"
Default value Factory settings
[Reset calibration]
Resets the device to factory-adjusted calibration. The dark spectrum and
reference spectrum will be deleted.
Determination ID
ID of the determination the wavelength calibration has been carried out
with. With calibration method Factory setting, ---- is displayed.
The determination ID can be copied and pasted into another field.
Calibration coefficients
Coefficients of the regression function with which the assignment of the
CCD pixels to a wavelength is carried out.
c#
Display of the wavelength coefficients c1 … c4.
7.14.6 Properties - Dark spectrum
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Dark spectrum
The Dark spectrum tab shows information on the dark spectrum stored
in the device.
If no dark spectrum has been recorded yet or the calibration has been
reset to factory settings, -- is displayed in the fields.
Date
Shows the date and time when the dark spectrum was recorded.
User
Shows the user logged in during recording of the dark spectrum.
Method
Shows the method with which the dark spectrum has been recorded.
Determination ID
ID of the determination in which the dark spectrum has been recorded.
The determination ID can be copied and pasted into another field.
Integration time
Shows the integration time during recording of the reference spectrum.