Metrohm tiamo 2.4 (process analysis) - Manual (Page 352)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
336 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
4.5.2.6.5.1 Result view - Results overview
Tab: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶ Result dis-
play ▶ Result overview
In the subwindow Result view of the dialog window Reprocessing the
results calculated during the CALC commands and the variables used for
are displayed and updated with each recalculation.
The following elements are shown for each CALC command:
Title
Name of the calculation command.
Result
Result name, result value with defined number of decimal places, result
unit.
Statistical evaluations
Results of the statistical evaluation (mean value, absolute and relative
standard deviations, number of measured values used for the statistics and
statistics set counter).
If several determinations are selected for reprocessing then the navigation
buttons can be used to switch between the result view of the individual
determinations:
Jump to the first determination.
Jump to the previous determination.
Jump to the next determination.
Jump to the last determination.
NOTE
If a result value is being monitored and lies inside the limits defined in
the CALC command then the text will be shown in green, if it lies out-
side the limits the value will be shown in red.