Metrohm tiamo 2.4 (process analysis) - Manual (Page 1441)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1425
Valence
Selection of the valence for the self-selected ion. This parameter is only
visible if Custom has been selected in the field Ion.
Selection -4 | -3 | -2 | -1 | +1 | +2 | +3 | +4
Default value +2
6.7.2.4 Deleting a sensor
Menu item: Configuration ▶ Sensors ▶ Edit ▶ Delete
With Edit ▶ Delete, the sensor selected in the sensor table is deleted.
6.7.2.5 Printing the sensor list
Dialog window: Configuration ▶ Sensors ▶ Edit ▶ Print (PDF)… ▶ Print list of sen-
sors (PDF)
With Edit ▶ Print (PDF)…, the dialog window Print list of sensors
(PDF) opens.
Orientation
Selection of the printing orientation.
Selection Portrait format | Landscape format
Default value Portrait format
Portrait format
Output of the sensor table in portrait format.
Landscape format
Output of the sensor table in landscape format.
[OK]
The sensor table is shown in the required format as a PDF file and can be
opened directly with Acrobat Reader; it can then be printed out and/or
saved.
6.7.3 Sensor properties
6.7.3.1 Editing the sensor properties
Dialog window: Configuration ▶ Sensors ▶ [Edit] ▶ Properties... ▶ Sensor - 'Name'
The parameters for the selected sensor are defined on the following tabs:
￭ Sensor
General information about the sensor, such as sensor name, sensor
type, set to work, etc.
￭ Calibration data
Information about the calibration of the sensor.
￭ Limit values
Definition of the limit value monitoring for slope and electrode zero
point.