Metrohm tiamo 2.4 (process analysis) - Manual (Page 152)

3.6 Run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
136 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
NOTE
Sample position, ID1 - ID16, Sample size and Sample size unit
can be changed live for a running determination (see Chapter 3.6.3.7,
page 136). Generally, no formula input is possible in these fields.
NOTE
The name of the method variables assigned in the START command is
displayed automatically for the sample data variables ID1 - ID16, Sam-
ple size, Sample size unit, Sample position.
3.6.3.6 Modify remark
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Modify remark ▶ Live
modifications
The dialog window Live modifications, in which the remarks can be
modified in a determination while it is running, opens with the context-
sensitive menu Modify remark.
Remarks
Freely definable remarks concerning the determination, that are saved
together with the determination. Prepared sample texts can also be
selected instead of making manual entries (see Chapter 3.5.1, page 128).
Entry 100 characters
3.6.3.7 Live modification
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Live modifica-
tions ▶ Live modifications
Certain sample data can be modified live in this dialog window while a
determination is running.
Sample position
Position of the sample on the rack. This number is used to move to the
sample position with the command MOVE. For this to be achieved, the
Sample position option must be set under Target for the Move para-
meter.
Input range 1 - 999 (Increment: 1)
Default value 'empty'