Metrohm tiamo 2.4 (process analysis) - Manual (Page 472)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
456 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
5.6.2.8 END
Dialog window: Method ▶ END ▶ END -'Command name'
End command for all tracks.
Appearance
The command has the following appearance:
Parameters
The END command does not have any parameters. It is created automati-
cally at the end of a track when a new track is inserted.
Command variables
No command variables are generated in the method run by the END
command.
5.6.3 Titration commands
5.6.3.1 Titration commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Titration
Commands for titrations.
Modes
The following titration commands can be selected:
￭ DET
Command for dynamic equivalence point titrations.
￭ MET
Command for monotonic equivalence point titrations.
￭ SET
Command for endpoint titrations.
￭ KFT
Command for volumetric Karl Fischer titrations.
￭ KFC
Command for coulometric Karl Fischer titrations with voltametric mea-
surement.
￭ BRC
Command for coulometric titration for determining the bromine con-
sumption.
￭ STAT
Command for STAT titrations.
￭ TET
Command for thermometric titrations.