Metrohm tiamo 2.4 (process analysis) - Manual (Page 519)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 503
Titrino
Input range
0 - 200
Default value 5
[New]
Opens the Measured value window # dialog window, in which the
parameters for a new window can be entered (see Chapter 5.6.3.2.3.9,
page 509).
[Properties]
Opens the Measured value window # dialog window, in which the
parameters for the selected window can be edited (see Chapter
5.6.3.2.3.9, page 509).
[Delete]
Deletes the window selected in the table.
Evaluation with volume window (mL)
[New]
Opens the Volume window # dialog window, in which the parameters
for a new window can be entered (see Chapter 5.6.3.2.3.10, page
510).
[Properties]
Opens the Volume window # dialog window, in which the parameters
for the selected window can be edited (see Chapter 5.6.3.2.3.10, page
510).
[Delete]
Deletes the window selected in the table.
5.6.3.2.3.7 DET U - Additional evaluations
Tab: Method ▶ DET U ▶ Properties... ▶ Additional evaluations
Command name
Name of the command.
Entry 25 characters
The following additional methods for evaluation of titration curves can be
activated and defined on this tab: