Metrohm tiamo 2.4 (process analysis) - Manual (Page 1244)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1228 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
5.6.7.6 STIR
5.6.7.6.1 STIR - Overview
Dialog window: Method ▶ STIR ▶ Properties... ▶ STIR - 'Command name'
Command for controlling a connected stirrer.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 888, 890, 901,
902, 904, 905, 906, 907
Titrino: 751, 758, 784, 785, 795, 798, 799
Conductometer: 856
Coulometer: 756, 831
Dosing Interface: 846
Titrotherm: 859
pH/Ion - Meter: 867
Sample Processor: 730, 778, 789, 814, 815, 857, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command STIR are configured in the following
dialog window:
￭ STIR - Properties
Command variables
The following command variables are generated in the method run by the
command STIR and can be used in formulas under the designation
'Command name.Variable designation':