Metrohm tiamo 2.4 (process analysis) - Manual (Page 1602)

7.14 Avantes spectrometer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1586 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Averaged spectra
Number of spectra that are recorded and averaged.
Smoothing
Shows the number of neighboring pixels with which the light intensity of
each pixel was determined.
Flash rate
Shows the number of flashes per second of a pulsed xenon lamp as light
source.
Spectrum
Shows the dark spectrum. The graph can be zoomed with the mouse. You
can display the whole spectrum again by double-clicking on it.
x Axis
Shows the wavelength in nm.
y Axis
Shows the intensity in counts.
7.14.7 Properties - Reference spectrum
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Reference spectrum
This tab shows information on the reference spectrum stored in the
device.
If no reference spectrum has been recorded yet or the calibration has
been reset to factory settings, -- is displayed in the fields.
Date
Shows the date and time when the reference spectrum was recorded.
User
Shows the user logged in during recording of the reference spectrum.
Method
Shows the method with which the reference spectrum was recorded.
Determination ID
ID of the determination in which the reference spectrum was recorded.
The determination ID can be copied and pasted into another field.