Metrohm tiamo 2.4 (process analysis) - Manual (Page 364)

4.6 Subwindow Information
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
348 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Comment
Possibility of entering comments on the control chart which will be pro-
duced together with the control chart.
Entry 1000 characters
[OK]
The control chart is shown in the required format as a PDF file and opened
directly with the Acrobat Reader; it can then be printed out and/or saved.
4.6 Subwindow Information
4.6.1 Information - Overview
Subwindow: Database ▶ Information
General
In the subwindow Information general information about the focused
determination in the determination table is shown. The subwindow can
be switched on in the program part Database during the definition of
the layout and thus made visible. It can be enlarged and reduced as
required; it can also be maximized.
Tabs
Information about the determination is shown on the following tabs:
￭ Determination
Display of general information about the determination.
￭ Method
Display of general information about the method used.
￭ Sample
Display of general information about the sample used.
￭ Configuration
Display of general information about the devices, sensors and common
variables used.
￭ Messages
Display of messages about the determination.
￭ Determination comment
Display of the comment on the determination.
4.6.2 Information - Determination
Tab: Database ▶ Information ▶ Determination
Display of general information about the determination.
Identification
Information about the identification of the determination.