Metrohm tiamo 2.4 (process analysis) - Manual (Page 708)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
692 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
5.6.3.3.6.9 MET Cond - Volume window
Dialog window: Method ▶ MET Cond ▶ Properties... ▶ Conductometric evalua-
tion ▶ Evaluation with volume window (mL) ▶ [New/[Properties] ▶ Volume win-
dow #
Volume windows are defined regions (windows) on the volume axis for
which different parameters for the potentiometric evaluation can be
defined. Only those endpoints which lie within these windows and addi-
tionally meet the parameters defined for each window will be recognized.
Only one endpoint will be recognized per window.
Lower limit
Lower limit for the volume window.
Input range 0.00000 - 9,999.99 mL
Default value 0.00000 mL
Upper limit
Upper limit for the volume window.
Input range 0.00000 - 9,999.99 mL
Default value 9,999.99 mL
Smoothing
Measure for the curve smoothing used for the data processing. The higher
the smoothing that is selected, the more the measurement curves will be
smoothed.
Input range 0 - 150
Default value 0
5.6.3.3.6.10 MET Cond - Fixed endpoint evaluation
Dialog window: Method ▶ MET Cond ▶ Properties... ▶ Additional evalua-
tions ▶ Fixed endpoint evaluation ▶ [New/[Properties] ▶ Fixed endpoint evalua-
tion #
Quantity
Selection of the fixed measured quantity to which the associated values
for the other quantities are to be interpolated from the list of measured
points.
Selection Measured value | Time | Volume
Default value Measured value
Fixed value
Value of the fixed endpoint.