Metrohm tiamo 2.4 (process analysis) - Manual (Page 994)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
978 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
5.6.4.5.6 MEAS Ipol - Fixed endpoint evaluation #
Dialog window: Method ▶ MEAS Ipol ▶ Properties... ▶ Additional evalua-
tions ▶ Fixed endpoint evaluation ▶ [New]/[Property] ▶ Fixed endpoint evalua-
tion #
Measured quantity
Selection of the fixed measured quantity to which the associated values
for the other quantities are to be interpolated from the list of measured
points.
Selection Measured value | Time
Default value Measured value
Fixed value
Value of the fixed endpoint.
Measured value (Titrando, 867, 855)
Input range
-2000.0 - 2000.0 mV
Measured value (Titrino)
Input range
-2000 - 2000 mV
Time
Input range
0.0 - 999999.9 s
5.6.4.6 MEAS Upol
5.6.4.6.1 MEAS Upol - Overview
Dialog window: Method ▶ MEAS Upol ▶ Properties... ▶ MEAS Upol - 'Command
name'
Command for amperometric measurements with selectable polariza-
tion voltage.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 851, 852, 857, 888, 890, 901, 904,
905, 906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799
pH/Ion - Meter: 867
Robotic Titrosampler: 855
Appearance
The command has the following appearance: