Metrohm tiamo 2.4 (process analysis) - Manual (Page 226)

4.3 Managing databases
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
210 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
automatically to the Last backup, and the Next backup field will be
automatically adjusted accordingly.
Input range 1 - 999
Default value 1
Selection day(s) | week(s) | month | year(s)
Default value month
Start backup automatically
on | off (Default value: off)
Automatic start of the backup for the database in the defined Backup
directory.
Backup directory
Selection of a directory predefined in the Program administration for
the automatic backup.
Selection Selection of the backup directory | Default
backup directory
Default value Default backup directory
NOTE
Make sure that you have read and write permission for the selected
directory.
4.3.5.5 Database properties - Monitoring
Tab: Database ▶ File ▶ Database manager... ▶ Database manager ▶ [Proper-
ties] ▶ Properties - Database - 'Database name' ▶ Monitoring
Definition of database monitoring.
Monitoring size
on | off (Default value: off)
Activates/deactivates size monitoring for the selected database. If this
check box is activated, then the Size field in the database table will be
highlighted in red when the limit value has been exceeded. At the same
time, a corresponding message also appears when the database is
opened.
Maximum size
Maximum permitted database size in MB.
Input range 1 - 2,147,483,647 MB
Default value 500 MB