Metrohm tiamo 2.4 (process analysis) - Manual (Page 28)

1.10 What is new in tiamo 2.4?
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
￭ In the Calibration curve/Calibration data dialog window, the num-
ber of decimal places for Variance has been increased from 1 to 3 for
CAL LOOP pH, CAL LOOP Conc and ELT LOOP.
Method program part
￭ New method examples are supplied for the 864 validation. They are
stored in the directory
...\examples\methods\english\Automation\864 Validation methods.
￭ In the MET Cond command, the lower limit of the threshold value of
the minimum and maximum evaluation has been lowered on the
Additional evaluations tab.
￭ The off selection for the Control range parameter is described in the
online help in more detail for the commands SET and KFT.
￭ In the CAL LOOP Conc command, the selection for the Number of
standards parameter has been raised from 5 to 9.
￭ A recommendation has been added in the Standard addition -
Overview chapter in the online help.
￭ The description of the principle of titration and the optimization of the
parameters has been improved in the STAT - Overview chapter in the
online help.
￭ Variance is now also available as the VAR command variable in the
commands CAL LOOP pH, ELT LOOP and CAL LOOP Conc.
￭ The default value for the stirring rate of the 089 Photometer has been
increased to 5. This modification affects the commands MEAS TMF,
MEAS Opt, MEAS Opt Conc and CAL MEAS Opt.
Configuration program part
￭ The limitation to two instruments applies only for Metrohm instru-
ments (Titrino, Titrando, etc.). That means that balances and other
generic (i.e. non-Metrohm) instruments can be included without limita-
tion (was already implemented in tiamo 2.3, Patch 1).
￭ The online help did not describe how signing affects the number of
login attempts, i.e. the relationship between signing and login moni-
toring.
1.10.3 Fixed bugs and problems
General
￭ Beginning with tiamo 2.3 (Build 98), communication between software
and devices has been optimized (was already implemented in tiamo
2.3, Patch 1).