Metrohm tiamo 2.4 (process analysis) - Manual (Page 493)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 477
[Properties]
Opens the dialog window in which the parameters for the selected win-
dow can be edited (see Chapter 5.6.3.2.2.10, page 483).
[Delete]
Deletes the window selected in the table.
5.6.3.2.2.7 DET pH - Additional evaluations
Tab: Method ▶ DET pH ▶ Properties... ▶ Additional evaluations
Command name
Name of the command.
Entry 25 characters
The following additional methods for evaluation of titration curves can be
activated and defined on this tab:
Fixed endpoint evaluation
Fixed endpoint evaluation
on | off (Default value: off)
If this check box is activated, then the associated values for the other
measured quantities will be interpolated with a fixed measured quantity
(Measured value, Volume or Time) for the fixed endpoint from the
measuring point list.
Moves the selected line up (changes the sequence).
Moves the selected line down (changes the sequence).
[New]
Opens the Fixed endpoint evaluation # dialog window for entering a
new fixed endpoint (see Chapter 5.6.3.2.2.11, page 484).
[Properties]
Opens the Fixed endpoint evaluation # dialog window to edit the
fixed endpoint selected in the table (see Chapter 5.6.3.2.2.11, page 484).
[Delete]
Deletes the selected line.