Metrohm tiamo 2.4 (process analysis) - Manual (Page 1384)

6.3 Configuration data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1368 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
6.3.3.6 Templates - Electrode types
6.3.3.6.1 Managing templates for electrode types
Dialog window: Configuration ▶ Tools ▶ Templates ▶ Electrode types... ▶ Elec-
trode type templates
Electrode type templates for the evaluation of the test of pH electrodes
are globally valid and can be selected in the command ELT LOOP.
The saved electrode templates are displayed in a table in the dialog win-
dow Electrode type templates. The table cannot be edited, but with a
click on the column title the table can be sorted according to the selected
column in either increasing or decreasing order.
[New]
Create a new template. The window Edit electrode type template
opens, in which a new template can be defined.
[Edit]
Edit the properties of the selected template. The window Edit electrode
type template, in which the template can be edited.
[Delete]
Delete the selected template.
[Copy]
Copy the selected template and save it under the name Copy of ....
6.3.3.6.2 Editing electrode types
Dialog window: Configuration ▶ Extras ▶ Templates ▶ Electrode types... ▶ [Prop-
erties] ▶ Edit electrode type template
The quality of an electrode is defined by the determination of limit values
for various parameters. The values for the minimum and maximum offset
voltage apply thereby for all evaluations.
The limit values are entered in the dialog window Edit electrode type
template on the following tabs:
￭ Excellent electrode
Limit values for an excellent electrode.
￭ Good electrode
Limit values for a good electrode.
￭ Usable electrode
Limit values for a usable electrode.