Metrohm tiamo 2.4 (process analysis) - Manual (Page 1247)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1231
Action
Selection Switch on | Switch off | Period of operation
Default value Switch on
Switch on
Switch on the stirrer. The stirrer keeps switched on after the command
has finished.
Switch off
Switch off the stirrer.
Period of operation
The stirrer can be switched on for a particular period.
Input range 0 - 9999.9
Default value 10.0
Selection s | min
Default value s
5.6.7.7 RACK
5.6.7.7.1 RACK - Overview
Dialog window: Method ▶ RACK ▶ Properties... ▶ RACK - 'Command name'
Command for initialization of the attached sample rack. The rack,
lift and robotic arm (if present) are reset, the rack code is read off and the
corresponding rack data is transferred to the Sample Processor.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 774, 778, 789, 814, 815, 855, 864, 874