Metrohm tiamo 2.4 (process analysis) - Manual (Page 71)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 55
You can select the system variables directly in the formula editor under
Variables/System variables in order to avoid syntax errors.
Available system variables
Variable name Description Data
type
ACC Autostart actual counter Number
ACE Autostart setpoint counter Number
DID Determination ID Text
FUN Full name of the logged-in user Text
REM Remarks Text
RUN Sample number Number
SEN Indication whether the end of the sample table has been reached; 1 = yes, 0 =
no Number
SIN Indication whether the determination has been started as a single determination
or within a series; 1 = single determination, 0 = series determination Number
SLI Sample table actual line (number) Number
STA Indication whether the statistics is activated; 1 = yes, 0 = no Number
STC Start counter Number
USN Short name of the logged-in user Text
ORG Method run: 1 = original determination, 0 = reprocessing Number
STO Indication whether the determination has been stopped (manual stop, stop via
SEND command, emergency stop) or terminated normally ; 1 = stopped, 0 =
terminated normally Number
2.4.3.8 Common variables
Dialog window: Formula Editor ▶ Variables
Common variables are global variables, which are adopted from the corre-
sponding table of the program part Configuration, where the common
variables can be defined, at the start of the determination and assigned to
the determination. The Variables field of the Formula editor lists all Com-
mon Variables which are available for the current method, sorted
according to name.
Syntax
'CV.Variable name.Variable name'
Examples: 'CV.TestDate', 'CV.TestTime.VAL', 'CV.Average-
Temp.UNI'
You can select the common variables directly in the formula editor under
Variables/Common Variables in order to avoid syntax errors.