Metrohm tiamo 2.4 (process analysis) - Manual (Page 1555)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1539
Shift rate
Sample rack speed of rotation for manual operation.
Input range 3 - 20 °/s
Default value 20 °/s
[Rack Data]
Opens the dialog window Rack data (see Chapter 6.12.3.1, page 1487)
or Rack data (774) (see Chapter 6.12.3.6, page 1492) in which the data
of the rack attached can be displayed and edited.
[Initialize rack]
Initializes the attached rack. This resets the rack, the lift and the robotic
arm, reads out the rack code and transfers the corresponding rack data to
the Sample Processor.
7.7.5 Properties - Initial position
On tab Initial position, a position can be defined which is automatically
moved to when initializing the sample changer.
Moving to the initial position
on | off (Default value: off)
If this option is activated, the position defined here is moved to when initi-
alizing the device.
Tower
Selection of the tower on the sample changer for moving to the required
position.
Only editable for Move to initial position = on and if the corresponding
sample changer has 2 towers, otherwise inactive.
Selection 1 | 2
Default value 1
Destination
Selection of the target position which is to be moved to:
Only editable for Move to initial position = on, otherwise inactive.
Selection Rack position | Special beaker | Ext. position
Default value Rack position
Rack position
Predefined position on the rack. The lift is thereby lowered to the work
position defined for that position.