7 general - pwm controller – Metrohm tiamo 2.4 (process analysis) User Manual
Page 1662
Advertising
7.20 IO controller
■■■■■■■■■■■■■■■■■■■■■■
1646
■■■■■■■■
tiamo 2.4 (for Process Analysis)
Output parameters
Output slope
for control task = pump control
Input range
-214,783,647.000 - 214,783,647.000
Default value
1
for control task = free controller
Input range
-214,783,647.000 - 214,783,647.000
Default value
1
Output offset
for control task = pump control
Input range
0% mapping of the output - 100% mapping
of the output 'Mapping unit of the output'
Default value
0% mapping of the output 'Mapping unit of
the output'
for control task = free controller
Input range
0% mapping of the output - 100% mapping
of the output 'Mapping unit of the output'
Default value
0% mapping of the output 'Mapping unit of
the output'
7.20.8.1.7
General - PWM controller
Advertising