Metrohm tiamo 2.4 (process analysis) - Manual (Page 895)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 879
Titrando, 855
Input range
0.01 - 166.00 mL/min
Selection off
Default value off
Titrino
Input range
0.01 - 150.00 mL/min
Selection off
Default value off
5.6.3.8.6.6 STAT pH - Stop conditions
Tab: Method ▶ STAT pH ▶ Properties... ▶ Stop conditions
Command name
Name of the command.
Entry 25 characters
Conditions for stopping the titration. If several stop conditions are set,
then the criterion which is fulfilled first will stop the titration.
Stop volume
Stops when the given volume has been added after the start of the titra-
tion (including start conditions). The stop volume should be adapted to
suit the sample weight or the titration vessel size.
Titrando, 855
Input range
0.00000 - 9999.99 mL
Default value 100,000 mL
Selection off
Titrino
Input range
0.000 - 9999.99 mL
Default value 100.00 mL
Selection off
Stop time
Stop when the entered time has elapsed after the start conditions have
been fulfilled.
Input range 0 - 999,999 s
Selection off
Default value off