Metrohm tiamo 2.4 (process analysis) - Manual (Page 1708)

8.4 Manual control - Functions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1692 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
856
Input range
–20.0 - 150.0 °C
Default value 20.0
Selection off
off
The conductivity at the measuring temperature is displayed.
Temperature compensation
Selection
Temperature coefficient | Sample solution
Default value Temperature coefficient
Temperature coefficient
Manual entry of a constant temperature coefficient.
Sample solution
Selection of a function for the temperature coefficient from the table
Sample solution (TC conductivity) - %1.
Temperature coefficient
Input range 0.00 - 9.99 %/°C
Sample solution
Select the name from the table Sample solutions (TC conductivity).
Selection DIN | Table entries
Default value DIN
[Start]
Starts measurement.
[Stop]
Stops measurement.
8.4.5.3 Measure - Intensity
Tab: Manual ▶ Intensity
Here the intensity of an uncorrected spectrum can be measured and dis-
played for the device type Avantes spectrometer.
Start wavelength
Lower limit of the spectrum.
Input range 100.0 - 2000.0 nm
Default value 400.0 nm
End wavelength
Upper limit of the spectrum.