Metrohm tiamo 2.4 (process analysis) - Manual (Page 268)

4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
252 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
4.4.2.2.3 Control chart template - Limit values
Dialog window: Database ▶ Tools ▶ Templates ▶ Control chart templates... ▶ Con-
trol chart templates ▶ [Properties] ▶ Properties - Control chart - 'Name'
Definition of warning and intervention limits to be shown on the control
chart.
Warning limits
Warning limits are always in orange on the control chart.
Lower limit
Lower warning limit.
Entry 10 digits
Input range -1.0E8 - 1.0E8 (max. 10 digits)
Upper limit
Upper warning limit.
Entry 10 digits
Input range -1.0E8 - 1.0E8 (max. 10 digits)
Intervention limits
Intervention limits are displayed in red on the control chart.
Lower limit
Lower intervention limit.
Entry 10 digits
Input range -1.0E8 - 1.0E8 (max. 10 digits)
Upper limit
Upper intervention limit.
Entry 10 digits
Input range -1.0E8 - 1.0E8 (max. 10 digits)
4.4.2.2.4 Control chart template - Statistics
Dialog window: Database ▶ Tools ▶ Templates ▶ Control chart templates... ▶ Con-
trol chart templates ▶ [Properties] ▶ Properties - Control chart - 'Name'
Definition of the display of statistics data on the control chart.
Show the statistics data
on | off (Default value: on)
If this check box is activated, then below the graph the statistics data for
Mean value, Standard deviation, Number of measuring points and
Minimum and maximum values will be shown.