Metrohm tiamo 2.4 (process analysis) - Manual (Page 1175)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1159
5.6.6.2 ADD
5.6.6.2.1 ADD - Overview
Dialog window: Method ▶ ADD ▶ Properties... ▶ ADD - 'Command name'
Command for Dosing a fixed volume of a solution with an exchange or
dosing unit.
Devices
This command can be executed with the following instruments:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 859, 888, 890,
901, 902, 904, 905, 906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 784, 785, 794,
795, 798, 799
Conductometer: 856
Dosing Interface: 846
pH/ion meter: 867
Sample changer: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the ADD command are set on the following two tabs:
￭ General/Hardware
Parameters for devices, dosing devices and stirrers.
￭ Dosing parameters
Parameters for setting the dosing.
Command variables
The following command variables are generated by the ADD command in
the method run and can be used in formulas under the designation 'Com-
mand name.Variable identification':