2 stirring - switching on/off – Metrohm tiamo 2.4 (process analysis) User Manual
Page 1692
8.4 Manual control - Functions
■■■■■■■■■■■■■■■■■■■■■■
1676
■■■■■■■■
tiamo 2.4 (for Process Analysis)
Instruments
The stirrer functions can be carried out with stirrers that are connected to
the following devices:
Titrino: 751, 758, 785, 784, 785, 794, 795, 798, 799
Titrando: 808, 809, 835, 836, 841, 842, 857, 859, 888, 890, 901, 902,
904, 905, 906, 907
Dosing Interface: 846
Conductometer: 856
Coulometer: 756, 831
pH/Ion - Meter: 867
Sample changer: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Photometer: 089 (stirrer is built-in in the photometer)
8.4.2.2
Stirring - Switching on/off
Program part: Manual control
Here the stirrers can be switched on and off. This tab appears when
selecting a single stirrer as well as with all stirrers.
Stirring rate
Selection of the stirring rate. This parameter can also be modified live.
all instruments except for photometer
Input range
–15 - 15
Default value
8
Photometer only
Input range
1 - 15
Default value
3
[Start]
Start stirring for the selected stirrer.
[Stop]
Stop stirring for the selected stirrer.