Metrohm tiamo 2.4 (process analysis) - Manual (Page 270)

4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
254 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Functions
[New]
Generates a new template. The dialog window Properties - Overlay
curves opens in which the properties for the new template can be
defined.
[Properties]
Open the dialog window Properties - Overlay curves in which the
properties of the template selected in the table can be edited.
[Delete]
Delete the template selected in the table.
[Copy]
Copy the template selected in the table and save it under the name Copy
of....
4.4.3.2 Edit curve overlay templates
4.4.3.2.1 Curve overlay - Properties
Dialog window: Database ▶ Tools ▶ Templates ▶ Curve overlay tem-
plates... ▶ Curve overlay templates ▶ [Properties] ▶ Properties - Curve overlay -
'Name'
Template name
Name for the curve overlay template which is saved in the configuration
database per client.
Entry 50 characters
Command type
Selection of the command type from which curves are to be overlaid.
Selection DET pH | DET U | DET Ipol | DET Upol | MET
pH | MET U | MET Ipol | MET Upol | SET pH |
SET U | SET Ipol | SET Upol | MEAS pH | MEAS
U | MEAS Ipol | MEAS Upol | MEAS T | MEAS
Conc | MEAS Cond | CAL MEAS pH | CAL MEAS
Conc | CAL Cond | MEAS T/Flow | MEAS TC
Cond | MEAS Ref | MEAS Spec | MEAS Opt |
CAL Spec | KFT Ipol | KFT Upol | KFC | BRC |
STAT pH | STAT U | DOS pH | DOS U | TET
Default value DET pH