Metrohm tiamo 2.4 (process analysis) - Manual (Page 1728)

8.4 Manual control - Functions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1712 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Graphical display
Besides the stepping motor, the assigned inputs and outputs are also dis-
played.
Reference
position
Brake
Safety switch 1
Safety switch 2
Safety switch 3
Overview of the states of a stepping motor:
ACTIVE INACTIVE ERROR
Motor on Motor off Display flashes
8.4.6.7 Multi-port valve
Program part: Manual control
If in the device tree a multi-port valve is selected, then the functions and
parameters belonging to this element are displayed in the subwindow for
functions/parameters.