Metrohm tiamo 2.4 (process analysis) - Manual (Page 1488)

6.10 Subwindow Global variables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1472 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
6.10.3.2 Properties - Global variable
Tab: Configuration ▶ Global variables ▶ [Edit] ▶ Properties... ▶ Global variable -
'Name' ▶ Global variable
Name
Name of global variable.
Entry 50 characters
Type
Selection of the type for a new global variable. For existing global varia-
bles the type will only be shown; it cannot be edited.
Selection Number | Text | Date/Time
Default value Number
Value
Value of the global variable. This value can be assigned in a method by a
CALC command or entered manually. For methods that use the global
variable it is available as the variable 'GV.Name.VAL' or 'GV.Name'
(short form) for calculations.
For type Date/Time variables, the date can be selected by pressing in
the dialog window Select date.
Type = Number
Input range
-1E+99 - 1E+99 (max. 15 places)
Type = Text
Entry
256 characters
Type = Date/Time
Selection
Date selection
Value (unit)
Designation of the unit. If a value is assigned automatically then the unit
will be automatically entered here. It is available for methods that use the
global variable as variable 'GV.Name.UNI' for calculations.
Entry 20 characters
Selection 'empty' | mol/L | mmol/L | µmol/mL | g/L |
mg/L | µg/L | mg/mL | ppm | % | mEq/L | mL |
µg
Default value mol/L
Comment
It is possible to enter remarks about the global variable.