Metrohm tiamo 2.4 (process analysis) - Manual (Page 688)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
672 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
EP recognition
Filter for the recognition of equivalence points:
Titrando, 855
Selection
first | greatest | last | ascending | descending
Default value first
first
Only the first endpoint to be found will be recognized.
greatest
Only the endpoint with the greatest ERC value, i.e. the steepest jump,
will be recognized.
last
Only the last endpoint to be found will be recognized.
ascending
Only endpoints with a positive slope of the titration curve will be rec-
ognized.
descending
Only endpoints with a negative slope of the titration curve will be rec-
ognized.
5.6.3.3.5.11 MET Upol - Fixed endpoint evaluation
Dialog window: Method ▶ MET Upol ▶ Properties... ▶ Additional evalua-
tions ▶ Fixed endpoint evaluation ▶ [New]/[Properties] ▶ Fixed endpoint evalua-
tion #
Fixed endpoint evaluation
on | off (Default value: off)
If this check box is activated, then the associated values for the other
measured quantities will be interpolated with a fixed measured quantity
(Measured value, Time or Volume) for the fixed endpoint from the
measuring point list.
Fixed value
Value of the fixed endpoint.
Measured value
Input range
-200.0 - 200.0 µA
Time
Input range
0.0 - 999999.9 s
Volume
Input range
0.00000 - 9999.99 mL