Metrohm tiamo 2.4 (process analysis) - Manual (Page 18)

1.2 Operation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
￭ Program versions
￭ What is new in tiamo 2.4?
Overview of the most important information concerning pro-
cess analysis instruments under tiamo
￭ Process analysis instruments
– IO controller
– Stepping Motor Controller
￭ Process analysis - Commands
￭ Process analysis - Manual control
1.2 Operation
Introduction
The modern user interface makes it simple for users to find their way
around tiamo. All commands and control elements are located where you
would expect. The bar on the left edge of the screen gives you access to
the five basic elements of tiamo:
Workplace Database Method Configura-
tion
Manual
Depending on the access permissions, these buttons are either visible or
invisible. The menu bar is in the upper part of the screen. It is also possible
for the individual commands to be hidden, depending on the access per-
missions.
In the center of the screen, you can find the information windows with
the settings, sample entry masks, live curves or results. This view can be
set individually for each user with the aid of the new Layout Manager. As
a result, users see only those windows or buttons they actually need for
their work. This reduces the introductory period for routine users to a min-
imum. Incorrect operation as a result of overcrowded screens is also a
thing of the past.
The method and calculation templates successfully introduced with
the Titrando system are also available in tiamo. A wide range of tried-and-
tested methods allow any user to create new methods quickly and simply
and to use them immediately.