2 measure - measure – Metrohm tiamo 2.4 (process analysis) User Manual
Page 1706
8.4 Manual control - Functions
■■■■■■■■■■■■■■■■■■■■■■
1690
■■■■■■■■
tiamo 2.4 (for Process Analysis)
Devices
The measurement functions can be carried out with the following instru-
ments:
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 784, 785, 794,
795, 798, 799
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 890, 901, 902, 904,
905, 906, 907
Dosing Interface: 846
Conductometer: 712, 856
pH/ion meter: 867
Robotic Titrosampler: 855
Spectrometer: Avantes
8.4.5.2
Measure - Measure
Tab: Manual
▶ Measure
Here the measurement can be started and stopped.
Measured quantity
The selectable measured quantities depend on the device whose measur-
ing input has been selected in the device selection.
Selection
pH | U | Ipol | Upol | Temperature | Conc | Cond
NOTE
Which other parameters are displayed depends on the selected mea-
sured quantity.
Sensor
Selection of the sensor; the ones of the sensor table are available.
Depending on the measured quantity only specific sensor types can be
selected.
NOTE
If an intelligent sensor is connected to the measuring input, then it will
be displayed.