Metrohm tiamo 2.4 (process analysis) - Manual (Page 323)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 307
By double-clicking with the left mouse button set the content of the
selected field as filter criterion and apply directly on the table.
NOTE
The quick filter can be used again within the filtered table, so that the
number of entries can be limited step by step.
4.5.2.4.4 Determinations - Special filter
Dialog window: Database ▶ Determinations ▶ Filter ▶ Special filter… ▶ Special fil-
ter - Database "Database name"
With the menu item Determinations ▶ Filter ▶ Special filter... or the
symbol the dialog window Special filter - Database opens for defin-
ing user-specific filters.
Filter
Selects the filter to be loaded for processing.
Selection 'Filter name' | New filter
Default value New filter
'Filter name'
The saved filter is loaded.
New filter
An empty table with the name New filter is loaded.
[Save filter]
Opens the dialog window Save filter in which the filter criteria entered in
the table can be saved as a special filter under the required name.
[Delete filter]
Deletes the special filter that is currently loaded.
Table view
The overview table shows all the defined filter criteria and cannot be
directly edited. The filter conditions will be numbered automatically in
sequence. The table view can be adapted with the left-hand mouse but-
ton as follows:
￭ Drag the border between column titles:
Sets the column width
￭ Double-click on the border between column titles
Sets the optimal column width