6 properties - exchange unit – Metrohm tiamo 2.4 (process analysis) User Manual
Page 1425
■■■■■■■■■■■■■■■■■■■■■■
6 Configuration
tiamo 2.4 (for Process Analysis)
■■■■■■■■
1409
Upper limit
Upper warning limit.
Entry
10 digits
Default value
1.0250
Intervention limits for titer
on | off (Default value: off)
If this option is activated, then the titer values will be shown in red if
these limits are exceeded.
Lower limit
Lower intervention limit.
Entry
10 digits
Default value
0.9500
Upper limit
Upper intervention limit.
Entry
10 digits
Default value
1.0500
6.6.3.6
Properties - Exchange unit
Tab: Configuration
▶ Titrants/Solutions ▶ [Edit] ▶ Properties... ▶ Exchange unit
Hardware
Name
Freely definable designation for the exchange unit.
Entry
24 characters
Default value
'empty'
Type
Display of the type of exchange unit:
Selection
EU | IEU
EU
Nonintelligent exchange unit without data chip.
IEU
Intelligent 806 Exchange Unit with data chip.
Order number
Order number of exchange unit. With intelligent exchange units the order
number is read out automatically and cannot be edited.