2 calibrating with manual solution exchange – Metrohm tiamo 2.4 (process analysis) User Manual
Page 1113
■■■■■■■■■■■■■■■■■■■■■■
5 Method
tiamo 2.4 (for Process Analysis)
■■■■■■■■
1097
■
CAL MEAS Conc
Measurement of standards for the calibration of ion-selective elec-
trodes (ISE electrodes).
■
ELT LOOP
Loop command for the test of pH electrodes.
■
ELT MEAS
Command for measuring calibration buffers for the test of pH elec-
trodes.
■
CAL LOOP Opt
Loop command for the calibration of colorimetric sensors.
■
CAL MEAS Opt
Command for measuring standard solutions for the calibration of col-
orimetric sensors.
■
CALL LOOP pH
Calibration loop for the calibration of pH electrodes.
■
CAL MEAS pH
Measurement of buffers for the calibration of pH electrodes.
5.6.5.2
Calibrating with manual solution exchange
Program part: Method
▶ Calibration commands
The basic structure of a calibration method with manual solution
exchange looks as follows: