3 calibrating with automatic solution exchange – Metrohm tiamo 2.4 (process analysis) User Manual
Page 1114
Advertising
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
1098
■■■■■■■■
tiamo 2.4 (for Process Analysis)
* Definition of the number of calibration solutions and the type of solution
exchange.
The request for changing the buffer or the standard must be activated in
the command CAL LOOP pH or CAL LOOP Conc, respectively. During
the run, a request for specifying the next buffer or standard is displayed
after each measurement.
5.6.5.3
Calibrating with automatic solution exchange
Program part: Method
▶ Calibration commands
The basic structure of a calibration method with automatic solution
exchange on a sample changer looks as follows:
Advertising