Metrohm tiamo 2.4 (process analysis) - Manual (Page 325)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 309
Filter name
Name under which the special filter is to be saved.
Entry 50 characters
[Save]
Saves filter under given name.
NOTE
The filters are saved globally in the configuration database and are
therefore available for all clients.
4.5.2.4.8 Determinations - Edit filter condition
Dialog window: Database ▶ Determinations ▶ Filter ▶ Special filter ▶ Special filter
- Database "Database name" ▶ [Edit] ▶ Edit line ▶ Edit filter criterion 'Filter
name'
With the command Edit ▶ Edit line in the dialog window Special filter
- Database "Database name" the dialog window Edit filter criterion
# opens, in which the filter criterion selected in the filter table can be
edited.
Link
Selection of the logic operator with the previous filter criterion.
Selection AND | OR
Default value AND
AND
Logical "AND" link
OR
Logical "OR" link
Field
Selection of a data field for which a condition is to be formulated.
Selection 'Field name'
Filtering is carried out only for the selected field. The
10 most recently selected fields are always available
for selection.
[Other...]
Open the dialog window Filter - Field selection. Herein all fields that
can be used for filtering are listed in tree-form. A field can be adopted by
marking it and then closing the dialog with [OK].