Metrohm tiamo 2.4 (process analysis) - Manual (Page 194)

3.7 Subwindow Method
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
178 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Selection Fit to height
Adjust to height of the window.
Selection Fit in window
Default value Fit in window
Adjust to both height and width of the window.
3.7.3 Method window - Live modifications
Subwindow: Workplace ▶ Method
Double-clicking on a command in the method window or in the context-
sensitive menu item Properties will open the properties window of the
relevant command in which all of the parameters are shown, but in which
only the specified live parameters can be edited. In addition, this parame-
ters window contains the [Apply] button with which the modified live
parameters can also be applied when the parameters window is open.
Live parameters can be modified not only in the BUSY status but also in
the READY status. If the option Comment on modification of meth-
ods is activated in the Security settings, then the dialog window Modi-
fication comment for method is displayed before the modified data is
applied.
The modified parameters apply until either the method is changed, the
user signs off or the program is closed. A message appears in such cases
asking whether the method should be resaved. Responding with [Yes]
causes a new method version to be created; responding with [No] retains
the old method version.
If live parameters are modified, then these modifications will be documen-
ted not only in the determination but also in the audit trail. All parameters
which were modified will be marked with an asterisk (*) in the parameters
report for the determination and saved at the end of the determination. If
parameters of already processed commands are modified, then these
changes will not in fact take effect until the next determination, although
they will nevertheless be marked as "modified live" in the method report
for the determination that has been executed. The markings disappear as
soon as the method is saved in the regular way.
Methods with modified live parameters can also be resaved manually at
any time in the READY status withFile, Method, Save orFile, Method,
Save under….