7 method groups, 1 creating method group, Method groups 4 – Metrohm tiamo 2.4 (process analysis) User Manual
Page 1780: Creating method group 4
9.7 Method groups
■■■■■■■■■■■■■■■■■■■■■■
1764
■■■■■■■■
tiamo 2.4 (for Process Analysis)
NOTE
The exported methods are stored uncoded but with a checksum. If
a file stored in this manner is tampered with, then it cannot be
imported again.
9.7
Method groups
9.7.1
Creating method group
How to proceed?
1 Select program part Method.
2 Click on the symbol
or the menu item File
▶ Method
groups....
The dialog window Method groups opens.
3 Click on [New].
The dialog window Properties - Method group - New Group
opens.
4 On the tab General in the field Name, enter a new name for the
method group and in the field Comment enter a comment.
5 On tab Access rights, assign access rights for method groups and
their methods per User group.
NOTE
The user group Administrators always has both access rights, i.e.
they cannot be disabled.
6 Click on [OK].
The dialog window Properties - Method group - New Group is
closed.