Metrohm tiamo 2.4 (process analysis) - Manual (Page 1139)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1123
Identi-
fica-
tion Description
.ETR Result of the electrode test:
0 = No data available
1 = Short circuit
2 = Excessive start drift
3 = Wrong buffer
4 = Problems with the diaphragm
5 = Reference system defective
6 = No buffer values for the temperature or excessive devia-
tion of the temperature between buffers
7 = Partial short circuit
8 = Glass defective
9 = Poor electrode
10 = Usable electrode
11 = Good electrode
12 = Excellent electrode
.FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command has
never ended
.LCO Loop counter = current number of completed runs, both of
Repeat loops and of While loops
.LST Start time of the loop command (Date/Time)
.SLO Electrode slope of the sensor used for the command (in mV
for ISE sensors)
.VAR Variance of the calculated result of the calibration in the
selected unit
5.6.5.8.2 ELT LOOP - Properties
Dialog window: Method ▶ ELT LOOP ▶ Properties...
Command name
Name of the command.
Entry 25 characters