Metrohm tiamo 2.4 (process analysis) - Manual (Page 1606)

7.15 Barcode reader
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1590 ￭￭￭￭￭￭￭￭
tiamo 2.4 (for Process Analysis)
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the validity period has expired then
one of the following actions will be triggered automatically at start test:
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the sequence or cancel it. If the sequence is continued then the
message that the validity period has expired will be automatically saved
with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
7.15 Barcode reader
7.15.1 Barcode reader - General
A barcode reader is used to enter sample data and other data in tiamo.
NOTE
A barcode reader only has to be configured as a device in tiamo when
the functions for automatic data import into sample tables are to be
used. If a USB barcode reader not configured as a device is connected
to the PC, it will be recognized (in the same way as a keyboard) as
being an HID (Human Interface Device) that can be used for data
entries in all fields.