Metrohm tiamo 2.4 (process analysis) - Manual (Page 1759)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 How to proceed?
tiamo 2.4 (for Process Analysis)
￭￭￭￭￭￭￭￭ 1743
4 Modify curve evaluation manually.
5 Then close the window with [OK].
6 Click on [Recalculate].
The selected determinations are recalculated. The results of this recal-
culation are entered automatically in the subwindow Result dis-
play.
7 In the dialog window Reprocessing click on [OK].
Each determination that has been modified by reprocessing will be
saved as a new version with a version number increased by +1 and
the subwindow Reprocessing will be closed. This button is inactive
when the recalculation has not yet been triggered and if not all the
selected determinations could be reprocessed.
9.3.11 Printing determination report
How to proceed?
1 Select program part Database.
2 Click on the symbol or the menu item File ▶ Open....
The dialog window Open database opens.
3 Select desired database or enter name in the field Database name.
4 Click on [Open].
The selected database opens and its data sets are displayed in the
Determination overview. The database name is displayed in the
title bar of the program, the number of currently opened databases
is displayed in the left upper corner of the database symbol.
NOTE
A maximum of 4 databases can be opened, but only 2 can be dis-
played at the same time. Databases that are open at the time the
program is ended will be automatically opened the next time the
program is started.
5 Select desired determinations.