Lenze 9400 Manual - Manual (Page 11)

Preface
The 9400 Servo Drives product range
System overview
1

11 EDS94SPP101 EN 7.1
0
1
2
3
4
5 6 7
8
9
:
;
<
=
> ?
@ . /
=
SSP94SYS01
 Mains voltage 3/PE AC 180 ... 550 V ±0 % or 3/PE AC 380 ... 550 V ±0 %
(depending on the device size/device power)
 Mains fusing (not contained in the delivery programme)
 Single Drives 9400  37
and corresponding installation backplanes
 Mains filter for Single Drives 9400  495
 RFI filter for Single Drives 9400  518
 Multi Drives 9400  155
and corresponding installation backplanes
 Power supply modules 9400
 213,  261
(for DC bus installations with Multi Drives 9400)
 Mains filter for power supply modules 9400  227
 RFI filter for power supply modules 9400  527
Equipment for all axis modules (device-dependent options):
 Communication modules and extension modules  346
 Memory modules  396
 Safety modules  403
 Motor holding brake control modules  419
 Brake resistors  560
 Diagnostic adapters  467
 L-force Engineer (software)
 Servo motors (motor catalogue)
 Geared servo motors ( ” )
 Standard geared motors ( ” )
Motor cables/system cables
(manual ”System cables”)