Lenze 9400 Manual - Manual (Page 517)

Accessories (overview)
Filters
Mains filters for regenerative power supply modules
9

516 EDS94SPP101 EN 7.1
Terminal data
Mains
Terminal X320 Labelling Description
L1
L2
L3
Connection of the L1, L2, L3 mains phases
 Connection for the supply-side PE conductor with M5 ring cable lug
SSP94NF406
Terminal data
Max. conductor cross-section Tightening torque

[mm 2 ] [AWG] [Nm] [lb-in]
E94AZMR0264xDB 10 6 1.2 ... 1.5 10.6 ... 13.3 1.0 x 4.0
E94AZMR0474xDB 25 2 2.5 22.1 1.0 x 6.5
PE connection data
∅ Starting torque

[mm] [Nm] [lb-in]
E94AZMR0264xDB
M5 3 26.5 PH2
E94AZMR0474xDB
24 V supply
Terminal X323 Labelling Description
GE GND external supply
SSP9400X11 24E 24 V external supply through safely separated power supply unit
(SELV/PELV)
IEC 61131-2, 22.8 ... 28.8 V, residual ripple max. ±5 %
Current during operation: 450 mA
Starting current: max. 4 A for 100 ms
Terminal data
Conductor cross-section Tightening torque
[mm 2 ] [AWG] [Nm] [lb-in]
Flexible
0.2 ... 2.5 24 ... 12 Spring terminal With wire end
ferrule
Stripping length / contact length: 10 mm