Lenze 9400 Manual - Manual (Page 405)

Accessories (overview)
Safety modules
9

405 EDS94SPP101 EN 7.1
Safety instructions

Danger!
Improper use of the module and the standard device may cause serious injury
and property damage.
Observe the chapters ”Safety instructions” and ”Residual hazards” contained
in the instructions for the standard device.

Stop!
Mounting/dismounting must be carried out when the supply voltage is
switched off to protect the electronic components against damage.
Only use safety modules in the module slot for safety modules (MSI).

Note!
The entry in code C00214 must correspond to the type of the plugged-on
safety module. Otherwise, the controller will report the following error:
”Safety module: Incompatible to setting in C00214”.