Lenze 9400 Manual - Manual (Page 360)

Accessories (overview)
Communication modules
Ethernet interface
9

360 EDS94SPP101 EN 7.1
DIP switch
E94YCEP001D
Pos. Description
S233 Node addressing:
The node address results from the sum of all switches being set to ”ON”.
z Example: Switches 32, 8, 4 = ON  address = 44
z Address area: 1 ... 100
1 … 100 with E94AYCEP as master
1 … 239 with another master

Note!
The Lenze setting of all switches is OFF.
Observe the information on how to set the node address in the ETHERNET
Powerlink Communication Manual.
External voltage supply
Supply the communication module via the connection X210 by means of a separate supply
voltage.
Designation Explanation
+ External voltage supply
U = 24 V DC (20.4 V - 0 % ... 28.8 V + 0 %)
I = 140 mA
- Reference potential for external voltage supply
For greater distances between the control cabinets, use a power supply unit in each control
cabinet.