Lenze 9400 Manual - Manual (Page 168)

Multi-axis controllers
Rated data
Devices for 400/500V-mains
5

168 EDS94SPP101 EN 7.1
5.3.2.4 Fuses and cable cross-sections
Basis of the data
Mains
Voltage
U
DC
[V]
Voltage range
U
DC
[V]
Frequency range
f [Hz]
2/PE DC
(alternativ)
325 ... 705 260 - 0 % ... 775 + 0 % 0
When the integrated DC busbar is used, wiring is not required. The mounting backplane
already includes an integrated fuse.
When terminals +UG/-UG are used, dimension the cables and fuses as described in the
chapter DC-bus operation.