Lenze 9400 Manual - Manual (Page 17)

Preface
Legal regulations
1

17 EDS94SPP101 EN 7.1
1.3 Legal regulations
Labelling
Lenze drive controllers are clearly labelled and defined by the contents of the nameplate.
Manufacturer
Lenze Automation GmbH, Hans-Lenze-Str. 1, D-31855 Aerzen
CE conformity
Complies with the ”Low voltage” EC Directive
Application as directed
The following applies to 9400 servo controllers and the accessories:
ƒ They must only be operated under the operating conditions described in this
Hardware Manual.
ƒ They are components for open and closed loop control of control variable speed
drives with asynchronous standard motors, asynchronous servo motors, PM
synchronous servo motors.
ƒ They are components for installation into a machine.
ƒ They are components used for assembly together with other components to form a
machine.
ƒ They comply with the protection requirements of the ”Low Voltage” EC Directive.
ƒ They are not machines for the purposes of the ”EC ”Machinery” Directive.
ƒ
They are not to be used as household appliances but for industrial purposes only.
The following applies to drives with 9400 servo controllers:
ƒ They comply with the EC ”Electromagnetic Compatibility” Directive if they are
installed according to the guidelines of CE-typical drive systems.
ƒ They can be used for operation at public and non-public mains.
ƒ They can be used in industrial premises as well as residential and commercial
premises.
ƒ The user is responsible for the compliance of his application with the EC Directives.
Any other use shall be deemed inappropriate!