Lenze 9400 Manual - Manual (Page 378)

Accessories (overview)
Communication modules
PROFIBUS
9

378 EDS94SPP101 EN 7.1
Assignment of the Sub-D socket
Connection of PROFIBUS to 9-pin Sub-D socket (X201):
View Pin Designation Explanation
1
2
3
4
5
6
7
8
9
1 free -
2 free -
3 RxD/TxD-P Data line B (received data/transmitted data plus)
4 RTS Request To Send (received data/transmitted data, no differential
signal)
5 M5V2 Data ground (ground to 5V)
6 P5V2 5 V DC / 30 mA (bus termination)
7 free -
8 RxD/TxD-N Data line A (received data/transmitted data minus)
9 free -
DIP switch
E94YCPM001D
Pos. Description
S200 Switches 1 ... 64: bus station addressing
The station address results from the sum of all switches in ”ON” position.
z Example: switches 32, 8, 4 = ON  address = 44
z Address range: 1 ... 126
Switch 2133: establishing compatibility with the communication module EMF2133IB

Note!
The Lenze setting of all switches is OFF.
Please observe the information provided in the PROFIBUS Communication
Manual about the setting of the station address and the EMF2133IB
compatibility.