Lenze 9400 Manual - Manual (Page 419)

Accessories (overview)
Motor holding brake control modules
9

419 EDS94SPP101 EN 7.1
9.7 Motor holding brake control modules
The motor brake control modules differ in the following features:
ƒ Rated voltage
ƒ Device size assignment
ƒ Mounting
The table shows the module/controller assignments according to the features listed.
Axis module Rated voltage of motor holding brake (control module)
Type 24 V 230 V 180 V
E94AMxE0024
...
E94AMxE0244
GG1
...
GG3
E94AZHY0051
c e E94AZHN0025
f g
E94AZHN0026
f g
E94ASxE0024
...
E94ASxE0244
E94ASxE0324
...
E94ASxE3664
GG6
...
GG9
E94AZHY0101
d e
E94AZHY0025
d e
E94AZHY0026
d e
Tab. 9-2 Motor holding brake/control module assignment
GGx Device size
c
integrated in the installation backplane, already used or retrofittable
d integrated in the device, already used or retrofittable
(recommended variant for the same rated voltage)
e integrated control module (automatic brake operation can be activated)
f external control (via digital output/digital input)
g external mounting (DIN rail or mounting plate)