Lenze 9400 Manual - Manual (Page 559)

Accessories (overview)
General accessories
Shield mounting
9

557 EDS94SPP101 EN 7.1
9.11.2 Shield mounting
Shield mounting kits facilitate the conductive connection of cable shields with a surface as
large as possible. Good shield connections are an important part of wiring according to
EMC guidelines. The shield connections on the devices are designed for different
installations. If a recommended shield mounting cannot be implemented, e.g. because of
thick cables, you can always choose an alternative. The alternative also ensures a good
shield connection.
Alwaysimplementastrainreliefinadditiontotheshieldmounting,sincestrainrelief isnot
possible with a shield mounting.
Possible installations of the shield connection:
ƒ EMC clip (spring clip)
– preferred for control cables or thin motor cables
ƒ EMC wire clamp
– preferred for motor cables, device-dependent sizes
ƒ Cable tie, metallic
– preferred for thick motor cables or several cables
E94AZJS090