Lenze 9400 Manual - Manual (Page 471)

Accessories (overview)
Accessories for diagnostics
Keypad
9

471 EDS94SPP101 EN 7.1
Step-by-step commissioning
Commissioning step Comment
1. Connect keypad to the front side of the basic device
on the diagnostic interface X6.
You can also connect or remove the keypad during
operation.
2. If the keypad is supplied with voltage, it carries out
a short self test.
3. The keypad is ready for operation if it displays the
main menu.
If you commission the keypad for the first time, you
are requested to select the dialog language.
4. You can now communicate with the basic device.
↓
← →
↑
E94AZKAE003
Display Meaning Comment
 LCD display
A
1
Headline
<MM
M>
Meaning of the menu In the menu level only
<PPP> Meaning of the parameter In the parameter level only
A
2
Triple-spaced display
<M1>
<M2>
<...>
List of the menus available In the menu level only
<P1>
<P2>
<...>
List of the parameters available In the parameter level only
<xxx> Setting of the selected parameter